ADATA S599 Series SATA II 2.5" SSD

It won't be long before you'll notice ADATA will insert  this product onto the market, we expect availability in April/May 2010. The performance of this all new SandForce 1200 based SSD is rated at 280/270MB/Sec (Read/Write) ! This SSD series will become available in somewhat unusual 100GB and 200GB volume storage sizes.

Check out the features

• Available in 100GB and 200GB capacities
• MLC NAND
• Seek Time: <.1ms
• Slim 2.5" Design
• 99.8 x 69.63 x 9.3mm
• Lightweight 63g
• Operating Temp: 0C ~ 70C
• Storage Temp: -45C ~ +85C
• Low Power Consumption: 2W operation, 0.5W standby
• Shock Resistant 1500G
• RAID Support
• MTBF 1 million hours
• 3-Year Warranty

The ADATA S599 utilizes SandForce's latest version of the SF-1200 controller, which will be adopted by other players in the market as well, e.g. OCZ, Corsair, GSKILL. The controller adds support for newer NAND memory types as in 34nm memory. New 34nm NAND Flash memory is cheaper to manufacture, thus cheaper for companies to implement, and for you as a consumer cheaper to purchase.

The read and write speed for the tested 100GB model are advertised at a blazing 280 MB/sec read and 270MB/sec write performance (measured through ATTO test software), which makes the product position itself in the extreme high-end SSD segment. Good performance but at a price alright.

Typically we see the competitive Indilinx Barefoot controller paired with 64MB of Elpida cache memory in the latest SSDs. SandForce however does not need that cache memory. Sandforce uses some sort of real-time data compression, saving on cache needs enabling it to write random I/O extremely fast. To manage all the multi-channel controller loving embedded into the controller we see a tiny processor inside the controller, and next to it a small memory cache, likely a couple of MB's, this figure has not been released to public though. So yeah, there is some cache memory yet it's inside the controller.

Why is that cache so important to that random I/O you ask. Well, history learned us the hard way that most budget SSDs had a 1st generation JMicron controller with very little cache (8KB / 16KB), and the issue there is that if they need to write a lot of really small files simultaneously these drives started to choke up every now and then, your a-typical data bottleneck within a storage unit. Large data-caches solve that issue very well.

By the way,  JMicron now has a bit of a bad reputation in the SSD market because its controllers suffered from that bottleneck issue due to lacking caches, but the new JMF612 incorporates 128MB of DDR2 cache for stuffer-free performance.

So a big help totally bypassing the small files issue for SSD drives is using a nice big mamma SDRAM buffer, or the approach that SandForce takes should be more than sufficient as well. Let's strip the product down though.s

In the above photo we see the SSD. To the right we spot MLC flash NAND memory chips, the S599 is paired with new 32nm (MLC) flash memory chips. Included a count on the backside we spot 16 chips in total, each with a 6.25GB capacity for a total drive size of 100GB.To the middle you can spot the SandForce SF1200 controller chip. Everything combined form the heart and soul of the SSD.

We have stated it many times and explained this quite a bit, but the seek time on SSD drives are insane; nothing short of amazing, at less than 1ms -- 0.1ms as we actually can measure. The average seek time for a traditional HDD is roughly 9ms. Do the math, hey, no more moving and spinning mechanical components are key here.

The traditional HDD is a limiting factor on the overall PC experience. Also, storage performance like this will, for example, greatly enhance load times of Photoshop, Generic applications, Office, games load times and even simply stuff like browsing the web will become a much faster experience.